雖然鐵藝大門很優良，造型也很美觀大氣，給人感十足，但是，還是有一點非常的擔心，那就是鐵會生銹，消費者擔心的就是鐵藝大門出現生銹的現象，不過，濟南鐵藝大門出現銹跡真的是產品質量出現問題嗎？

Although the iron gate is very good, beautiful and grand, giving people a sense of security, there is still a great concern that the iron will rust, and consumers are worried that the iron gate will rust. However, is the rust on the iron gate in Jinan really a product quality problem?

其實，從制作工藝上看，優良的鐵藝大門廠家在制作鐵藝大門產品時，都會對其進行多道工序的防腐防銹處理。從整體原材的熱鍍鋅防銹處理，到防腐防銹工藝的加強，產品后的噴涂加工等，正常使用下可以保證30年內不生銹。

In fact, from the perspective of manufacturing process, excellent iron gate manufacturers will conduct anti-corrosion and rust prevention treatment in multiple processes when making iron gate products. From the hot galvanizing and rust prevention treatment of the whole raw materials, to the strengthening of the anti-corrosion and rust prevention process, and the spraying processing after the product, it can be guaranteed that there will be no rust within 30 years under normal use.

另外，除了鐵藝大門廠家做好工藝和防銹處理之外，作為使用者，業主們也要保證鐵藝大門的正常使用，不要因外力而造成磕碰，導致油漆剝落，一旦有外力導致油漆剝落，需要進行修補，不能基材暴露在空氣中，否則很容易生銹腐蝕。同時，業主們也要對鐵藝大門進行定期清潔，及時將表層上的灰塵及時處理干凈，避免灰塵損傷油漆的光澤度。

In addition, in addition to the process and rust prevention treatment of the iron gate manufacturer, as users, the owners should also ensure the normal use of the iron gate, and do not cause bumps due to external forces, resulting in paint peeling. Once the paint peeling is caused by external forces, it needs to be repaired, and the base material should not be exposed to the air, otherwise it is easy to rust and corrosion. At the same time, the owners should also regularly clean the iron gate, and timely clean the dust on the surface to prevent the dust from damaging the gloss of the paint.

當鐵藝大門不小心磕碰生銹時，記住一點，別用砂紙之類的介質打磨。要在生銹的地方用棉紗布（例如破損的棉絲襪），蘸上機油均勻的涂抹，幾分鐘后就可以另外用布輕松的擦掉銹跡。如果銹斑面積較大，還是請專門的鐵藝師傅處理。

When the iron gate is accidentally knocked and rusted, remember not to use sandpaper or other media to polish it. Use cotton gauze (such as damaged cotton stockings) in the rusty area, dip it in the engine oil and smear it evenly. After a few minutes, use another cloth to easily remove the rust. If the rust spot is large, please ask a special iron craftsman to handle it.

由上可知，鐵藝大門出現銹跡，不僅僅是因為產品質量不好，也有很多外界的因素導致，所以對于鐵藝大門要小心使用，不要遭受暴力破壞！更多相關產品內容就來我們網站http://nsjsw.cn進行咨詢吧！

It can be seen from the above that the rust on the iron gate is not only caused by poor product quality, but also by many external factors. Therefore, the iron gate should be used carefully and not be damaged by violence! More relevant product content will come to our website http://nsjsw.cn Consult!