1、避免碰撞，這是買鐵藝大門后個注意的，要小心處理；放置的地方應該是堅硬物體不常碰到的地方；一個地方一旦選定，就不要頻繁更換；安裝的墻面應保持平整，使熟鐵門安裝穩定、平整。如果搖晃不穩，久而久之，門會輕微變形，影響使用壽命。

1. Avoid collisions, this is something to pay attention to after buying an iron gate, be careful when handling it; The placement should be in a place where hard objects are not frequently touched; Once a place is selected, do not change it frequently; The installed wall should be kept flat to ensure stable and even installation of the wrought iron door. If the shaking is unstable, over time, the door will deform slightly, affecting its service life.

2、清潔除塵，對于干凈的朋友，用純棉針織品作為抹布擦拭門表面。對于門上的凹陷和壓花圖案中的灰塵，使用柔軟的羊毛刷來灰塵。

2. Clean and remove dust. For clean friends, use pure cotton knitted fabric as a cloth to wipe the surface of the door. Use a soft wool brush to remove dust from the indentations and embossed patterns on the door.

3、遠離酸和堿，對鐵藝大門有腐蝕作用，酸堿是鐵門的頭號天敵。如果鐵門不慎沾上污漬，應立即用清水沖洗干凈，然后用干棉布擦干。

3. Stay away from acid and alkali, which have a corrosive effect on iron gates. Acid and alkali are the number one enemies of iron gates. If the iron door accidentally gets stained, it should be immediately rinsed with clean water and then wiped dry with a dry cotton cloth.

4、隔絕濕氣，應安裝在通風的地方。濕度會導致金屬過早腐蝕，鍍鉻會造成剝離，影響門的使用。  5、除銹，如果鐵藝大門生銹了，不要主動用砂紙打磨。如果鐵銹小而淺，將棉紗浸在機油中，涂在鐵銹上。過一會兒，用布擦拭，銹跡。如果鐵銹變得更大更重，應請相關技術人員進行修理。

4. To isolate moisture, it should be installed in a well ventilated area. Humidity can cause premature corrosion of metals, and chrome plating can cause peeling, affecting the use of doors. 5. Rust removal, if the iron gate is rusted, do not actively use sandpaper to polish it. If the rust is small and shallow, soak the cotton yarn in engine oil and apply it to the rust. After a while, wipe with a cloth to eliminate rust. If the rust becomes bigger and heavier, relevant technicians should be consulted for repair.